Products

These pipes are widely used for conveying raw water & distribution of treated water in majority of rural water supply schemes, where the requirement of water is less. Mostly medium quality GI pipes are used.

A type of rolled steel plate that has a moderate thickness, of around 3mm is a steel boiler plate. To meet a special standard of industries, boiler plates are manufactured. It not only has the qualities of regular industrial steel, but it also has increased temperature resistance.

High Tensile Steels are steels at the lower end of the medium-carbon range which have additional alloying ingredients in order to increase their strength, wear properties, and tensile strength.

Powder Coating is a dry finishing process created by an electric charge that causes a dry powder to fuse to the surface of the metal. This is then baked in a curing oven to achieve a smooth coating. It is usually used to create a hard finish that is tougher than conventional paint.

Canopy structure is the organization or spatial arrangement (three-dimensional geometry) of a plant canopy. Leaf area index, leaf area per unit ground area, is a key measure used to understand and compare plant canopies. The canopy is taller than the understory layer.

Manufactures of aluminium poles, like Hydro, use marine-grade aluminium that forms a protective oxide layer. This makes the poles highly corrosion resistant and prolongs their life. Due to this natural corrosion resistance.

The Sun's rays fall on the collector panel (a component of solar water heating system). A black absorbing surface (absorber) inside the collectors absorbs solar radiation and transfers the heat energy to water flowing through it. Heated water is collected in a tank which is insulated to prevent heat loss.

High mast lighting is a type of site light fixture that is commonly used to illuminate large areas from a very high mounting height for storage, transportation, and pedestrian use and safety. High mast fixtures are typically mounted on poles 40 feet to 150 feet tall, with four to 16 fixtures mounted on each pole.

A Miter bend is a bend that is made by cutting pipe ends at an angle and joining the pipe ends. A true miter bend is a 90-degree bend made by cutting two pipes at 45 degrees and joining them by welding. Similarly, three pipes cut at 22.5 degrees will give a 90 degree miter bend.

A sleeve coupling, also known as a split coupling or just a sleeve, is a mechanical device used to connect two rotating shafts in order to transmit torque. It is often used in industrial machinery and engines and can be found in many different types of equipment

Octagonal Pole Manufacturer MOHAN INDUSTRIES is the largest manufacturing company in Poles Octagonal Poles are used to securely illuminate private residential areas, commercial and industrial locations. The street lighting pole range is designed with an outreach arm, in either single or double arrangement, as per customer specifications.

Signage Mast System are required for identification of utility premises. This can be with or without lights or retro reflective sheets.